There are different ways to do restoration carpet cleaning even though in most cases it will be described by the type of equipment that will be used by the carpet cleaning Austin Texas Company that you are going to hire. There are basically three types of equipment that are used widely and there are good reasons for the same; these types of equipment are highly endorsed by all the leading carpet manufacturers and this is what most professionals will always make use of:
Steam extraction: Steam extraction is a carpet cleaning Austin Texas method especially designed for carpets that have been soiled very extensively or may have been subject to various forms of abuse by children and pets. This method employs a high pressure steam cleaning fine mists of hot water that is mixed with a cleaning solution and gets injected deep into the carpet. This combination uses the heat and cleaning solution to extract all the grime from your carpet’s fibers while the powerful vacuum extracts moisture and dirt; steam cleaning also removes all odors and kills dust mites and bacteria.
Low-moisture extraction: This is a carpet restoration cleaning method which is also called steam cleaning but it is a little different. The cleaning solution is still mixed using hot or warm water but it is applied using a fine spray. The solution and the heat are the effective agents that release the dirt before it is sucked away using a powerful vacuum. Drying time for the carpet will vary from a few hours to about 12 and this will depend on the cleaning equipment that was used or the fiber that made the carpet.
Dry compound extraction: Also known as dry cleaning, this restoration carpet cleaning method involves sprinkling of a dry compound into the carpet so as to dislodge all dirt by working it into the fibers by using a motorized or manual brush. Sometimes the carpet cleaning Austin Texas expert will apply mist on the surface of the carpet using a complimentary solution which enhances the quick removal of grime. As soon as the compound has been absorbed the dirt will be removed using a powerful vacuum.
Foam extraction: This carpet restoration cleaning method is also called carpet shampooing. A foam based carpet cleaning agent will be applied to the carpet before it is scrubbed into a pile using a motorized brush. This foam acts to release soil and dirt from the carpet fibers so that when the foam and the carpet dry up, the dirt and residue are vacuumed away.
Bonnet cleaning: Though referred to as dry cleaning, this is a wet process. The carpet cleaner uses a cleaning agent that is mixed with carbonated water and then is applied as a mist using a rotating buffer or bonnet machine that spreads the cleaner over the carpet and uses an absorbent pad to extract dirt.
Article author