Things to remember when repairing a broken spring

All garage doors operate on spring tension. It is the spring that makes it much easier to lower or raise the door. In fact, if your garage door is not opening or closing smoothly, it is probably because of the spring tension needs adjusting. • There are two kinds of springs that are used with garage doors—the extension spring and the torsion spring. The torsion spring system consists of one or two springs typically mounted above the middle of the garage door. Ideally, these springs should now be replaced yourself as they are held under a lot of tension and serious accidents have been known to happen if they are tampered with. Garage Door Repair Channelview will be able to send a service technician to do the task for you. Also, you will have to hire a spring tensioning tool to be able to complete the task. • The extension springs run along the right and left door tracks and are not as dangerous to repair yourself. However, it is not a task that you can undertake yourself. Make sure you have one more person to help you. • When you take the old spring out, make sure you don’t leave any broken pieces behind as this will hinder the movement of the garage door. • When you go and purchase new springs, you need to get the exact dimensions of the old one, or better still take the old one with you so that you don’t end up returning with the wrong springs. Garage Door Channelview will be able to supply springs of all different shapes and sizes. • You should change both springs instead of just the one because the door may not balance correctly due to uneven wear and tear. • Ensure that there is no one stand closing to the spring when you put the door back in place. • A safety cable should also be threaded through the centre of the spring and anchored securely through the other end. If the spring breaks, the cable will act a safety net.